176
FSN-1004 • User’s Guide • Rev 00
5. System Setup
Aux Output Setup
Advanced Setup
— Use the following steps to set advanced SOC output parameters:
1.
On the
Output and Process Panel
, press
{Advanced Output Setup}
to display
the
Advanced SOC Setup Menu
.
2.
On the
Advanced SOC Setup Menu
, press the
SOC
Aux connector that you
want to set up.
3.
Press
{Totals}
, and use the
{H Total}
and
{V Total}
controls to set the total
number of horizontal pixels and vertical lines in the output.
4.
Press
{Active and Pos}
, and use the
{H Pos}
,
{V Pos}
,
{H Active}
and
{V
Active}
controls to set the output’s H and V active area, and the H and V position.
5.
Press
{Sync}
, and use the
{H Sync}
and
{V Sync}
controls to adjust the output’s
horizontal and vertical sync pulse width.
6.
If the selected SOC output format is vertically locked to the native resolution’s
vertical sync, press
{Offset Timing}
.
Use the
{H Offset}
and
{V Offset}
controls
to adjust the SOC output’s video timing relative to the system’s native resolution.
7.
Press
{Back}
to return to the
Output and Process Panel
, then press
{Back}
to
return to the
Aux Setup Menu
.
Sizing and Scaling
— Use the following steps to set up SOC sizing and scaling:
1.
On the
Aux Setup Menu
, press the
SOC
Aux connector that you want to set up.
2.
Press
{Setup}
to display the
SOC Setup Menu
for the selected output.
3.
Press
{Sizing and Scaling}
to display the
Output Sizing and Scaling Panel
.
4.
Press
{Size and Position}
, then use the
{H Size}
,
{V Size}
,
{H Position}
and
{V
Position}
controls to adjust the output’s size and position.
5.
If desired, in the
Quick Adjust
section, use the
{Fill H}
,
{Fill V}
and/or
{Fill H/V}
controls to scale the output.
6.
If desired, press
{Aspect Ratio}
, then select the desired aspect ratio in the
Aspect Ratio Pop-up
.
7.
To size and position the video
within
the boundaries of the output, press
{Pan
Zoom Source}
. Use the
{Source H Size}
,
{Source V Size}
,
{Source H Pos}
and
{Source V Pos}
controls to size and position the video.
8.
Press
{Mask}
, then use the
{Mask Top}
,
{Mask Bottom}
,
{Mask Left}
and
{Mask Right}
controls to mask selected portions of the output, as required.
9.
If desired, in the
Output Mask Presets
section, select the desired preset — and
remember that all mask presets in this section are additive.
10.
Press
{Back}
to return to the
Aux Setup Menu
.
Caution
The
Advanced SOC Setup Menu
is designed for advanced
users who are familiar with all aspects of output timing
adjustments. Do not use this menu if you are uncertain about
any output timing parameter.
Important
Changing the H and V Totals will cause a disruption to the
SOC’s output video. Press
{Apply}
to apply changes, or
{Undo}
to reverse un-applied changes.
Содержание FSN-1004
