Barco FSN-1004 Скачать руководство пользователя страница 39

Страница: 39 / 246

FSN-1004 • User’s Guide • Rev 00

2. FSN-1004 Orientation

Card Descriptions

jLb=`~êÇ



Slot number:

The

M/E (Mix/Effects) Card

provides the following functions:

•

Crosspoint switch.

•

Six native Aux outputs.

The figure below illustrates the

M/E

card’s front edge and rear panel connectors:

Figure 2-7.

M/E card front edge and rear panel connectors

Following are descriptions of all

M/E

card components:

Ejectors

Use the card’s top and bottom

Ejectors

to remove (and re-insert) the card.

2) Card Power LED

The

Card Power LED

indicates power status for the card. Refer to the “

Card

LEDs

” section on page 47 for details.

3) Loaded

LED

The

Loaded LED

indicates the status of all FPGAs on the card. Refer to the

“

Card LEDs

” section on page 47 for details.

Important

This card is pre-installed in the FSN-1004. Do not move.

oad

Mix /

Effects Car

M/E

Front Edge

Rear Panel

Ejectors

Card Power LED

Loaded LED

Native Aux Outputs

Содержание FSN-1004























































































































































































































































Результаты поиска

Содержание FSN-1004

Отзывы:

Barco FSN-1004, Руководство пользователя, Страница: 39 / 246

Результаты поиска

Содержание FSN-1004

Отзывы: