Barco FSN-1004, Руководство пользователя, Страница: 92 / 246

92 FSN-1004 • User’s Guide • Rev 00
4. Menu Orientation
Memory Menu
bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå
From the Memory Menu , press {Enables} to display the Enables Menu , as shown below
in the View Mode .
Figure 4-27. Enables Menu, View Mode (sample)
The Enables Menu provides a close-up view of the selected register only, and all of its
associated Enables. The menu can be accessed in all modes ( View , Store and Recall ),
but not all functions are available, depending on the mode.
Within an individual module, Enables are arrays of sub-functions that can be toggled on or
off. For example:
•
If you store a register that includes the SYS module, there are two Enables within
that module that divide the SYS into its various functional components.
•
You can elect to leave all enables on (and thus store or recall the entire SYS), or
you can elect to turn specific Enables on or off (and thus store or recall only a
portion of the SYS). Refer to the “ Enable Descriptions ” section on page 94 for a
complete explanation of each module’s Enables.
The Enables Menu is divided into three sections:
•
Register Table — The top portion of the menu provides the same table as the
Memory Menu , but only the selected register is shown on a single line. All
column headings are identical, including the space above the three left-hand
columns — which is reserved for the large
STORE and RECALL labels.