Barco FSN-1004, Руководство пользователя, Страница: 194 / 246

194 FSN-1004 • User’s Guide • Rev 00
6. Operations
Working with Memory Registers
sáÉïáåÖ=jÉãçêó=oÉÖáëíÉêë
In the View Mode , you can look at all memory registers, enter register descriptions, and
view the status of all modules and Enables. You cannot modify the modules or the Enables
within a register, but you
can lock, unlock and delete registers.

Use the following steps to view a memory register:
1. Navigate the Memory Menu using one of the following methods:
~
In the Menu Bar , press the {Memory} button.
2. Select the desired register that you want to view.
~
Press the {Memory Register} button, then on the keypad, enter the
desired register and press {Enter} .
3. In the main Memory Table , note the register’s lock/unlock mode, description, and
the exact modules stored in the register.
4. If desired, press {Description} to change the register’s description.
5. If desired, press {Advanced} to display the Advanced Memory Menu , where you
can lock, unlock, and delete registers. Refer to the “ Locking and Unlocking
Memory Registers ” and “ Deleting Memory Registers ”sections below for details.
6. If desired, press {Enables} to switch to the Enables Menu . There, you can view
the module’s Enables, enter or change the description, and switch to the
Advanced Memory Menu . If desired, you can also view other registers within the
Enables Menu , using the same methods outlined in step 2 above.
içÅâáåÖ=~åÇ=råäçÅâáåÖ=jÉãçêó=oÉÖáëíÉêë
The View Mode is the only mode in which you can lock and unlock registers.

Use the following steps to lock and unlock memory registers:
1. Ensure that you are not in the Store or Recall modes. If so, cancel the mode.
2. Navigate the Memory Menu using the following method:
~
In the Menu Bar , press the {Memory} button.
3. Select the register that you want to lock or unlock.
~
Press the {Memory Register} button, then on the keypad, enter the
desired register and press {Enter} .
4. Press {Advanced} to display the Advanced Memory Menu .
5. Press the {Lock Unlock} button to toggle the register’s mode.
~
If currently unlocked, press {Lock Unlock} to lock the register. An “ X ”
appears in the table cell under the Lock heading. The register can not
be deleted or over-written.
~
If currently locked, press {Lock Unlock} to unlock the register and
remove the “ X ” from the table cell. The register can now be deleted and
over-written.
6. Repeat from step 3 to lock or unlock additional registers.