FSN-1004 • User’s Guide • Rev 00
175
5. System Setup
Aux Output Setup
^ìñ=lìíéìí=pÉíìé
FSN-1004 system setup:
Step 8
This procedure enables you to name standard Aux outputs and set up a variety of
parameters for universal Aux outputs (on any installed
SOC
).
Prerequisite
— Ensure that you are familiar with the
Output Setup Menu
.
” section on page 138.
Map and Name
— Use the following steps to map and name Aux outputs:
1.
In the
Menu Bar
, press
{System}
to access the
System Menu
.
2.
Press
{Output Setup}
to display the
Output Setup Menu
.
3.
In the
Rear I/O View
, press the Aux connector that you want to name. In the
Aux
Table
, the Aux output is highlighted.
4. Name
Output
— Press
{Out Name}
to associate a name (up to eight characters in
length) with the selected Aux output. When the pop-up
Keyboard
appears, enter
the desired name and press
{Enter}
on the
Keyboard
.
5.
Repeat from step
3
for all Aux outputs that you wish to map and name.
Format and Processing
— Use the following steps to set the universal Aux output
format, and preliminary processing parameters:
1.
On the
Aux Setup Menu
, press the
SOC
Aux connector that you want to set up.
2.
Press
{Setup}
to display the
SOC Setup Menu
for the selected Aux output.
3.
Press
{Output and Process}
to display the
Output and Process Panel
.
4.
Press
{Output Format}
to display the
Output Format Keypad
. Locate the
desired output format and press
{Apply}
.
5.
Press
{Advanced Output Setup}
to display the
Advanced SOC Setup Menu
,
which enables you to adjust advanced SOC output parameters. See below for
details and instructions.
6.
Press
{Sharpness}
, and use the
Sharpness
control to set the input’s sharpness.
7.
Press
{Flicker Filter}
,
and use the
Flicker Filter
control to adjust the flicker.
8.
Press
{DVI Sync}
, and select the desired polarity of the digital sync output on the
DVI connector.
9.
Press
{Analog Type}
, and select the desired type of analog sync output on the
HD-15 connector.
10.
If
{HV Sync}
is selected on the
{Analog Type}
button, press
{Analog Sync}
and
select the desired polarity of the analog sync output on the HD-15 connector.
11.
If you want to copy settings to another SOC channel, press
{Copy All Settings}
.
In the
Copy Settings Keypad
, select the desired channel, and press
{Copy}
to
complete the process.
12.
If you want to set the channel’s settings to their default value, press
{Restore
Default Settings}
.
13.
Press
{Back}
to return to the
Aux Setup Menu
. Repeat from step
1
to set up
additional Aux outputs.
8
Содержание FSN-1004
