Barco FSN-1004 Скачать руководство пользователя страница 131

Страница: 131 / 246

FSN-1004 • User’s Guide • Rev 00

131

4. Menu Orientation

System Menu

Press

{H Size}

to change the universal input’s horizontal size.

Remember that

{H Size}

and

{V Size}

track together if the

{Lock}

enabled.

Press

{V Size}

to change the universal input’s vertical size.

Press the

{Lock}

button to lock or unlock

and

tracking. When

locked, both parameters track together. When unlocked, H and V can be
adjusted independently.

Press

{H Position}

to change the universal input’s horizontal position

along the X axis.

Press

{V Position}

to change the universal input’s vertical position along

the Y axis.

Press

{Reset}

to reset all size and position values to default (including

those performed from the

Quick Adjust Section

). Any Mask values

present in the image will not be affected.

The figure below illustrates the

Quick Adjust

section, which appears when

{Size

and Position}

is pressed:

Figure 4-59.

Quick Adjust Section

The following adjustments are provided:

Press

{Fill H}

to scale the selected universal input up (or down) to the

current native

horizontal

resolution. Please note:

•

Aspect ratio is maintained. Manual size/position adjustments
using the four value buttons are maintained.

•

If the left and/or right edges of the image are manually masked,
those edges are used for the

Fill H

calculations.

•

Black bars are visible above and below an image, for example,
when a 16:9 image is scaled down to 4:3.

•

The top and bottom portions of an image may fall outside of the
raster, for example, when a 4:3 image is scaled up to 16:9.

Reset

Fill

H/V

Quick Adjust

Fill

Содержание FSN-1004























































































































































































































































Результаты поиска

Содержание FSN-1004

Отзывы:

Barco FSN-1004, Руководство пользователя, Страница: 131 / 246

Результаты поиска

Содержание FSN-1004

Отзывы: