Barco FSN-1004, Руководство пользователя, Страница: 202 / 246

202 FSN-1004 • User’s Guide • Rev 00
7. Multiviewer Operations
Multiviewer Menu Orientation
•
UMD Text — Indicates the current text string shown in the corresponding UMD.
Use the {UMD Text} button to change the text (maximum eight characters).
•
Color — Indicates the specific color assigned to the selected PIP’s UMD. Four
color selections are available, as configured on the Select Colors Menu . Use the
{UMD Color} button to change the assigned color.
•
Clock — If a clock is available in the layout, a special “ Clock ” row appears at the
bottom of the table. Highlighting this row enables you to turn the clock on and off.
The following functions are provided in the Tool Bar :
To set up the Multiviewer’s output, press {Output Setup} to display the Multiviewer
Output Setup Menu . This menu sets the resolution for both MVR outputs. Refer to the
“ Multiviewer Output Setup Menu ” section on page 203 for details.
To select a single or dual Multiviewer layout from the library of pre-configured layouts, press
{Select Layout} to display the Select Layout Menu . Refer to the “ Select Layout Menu ”
section on page 204 for details.
To set colors for the Multiviewer’s background, PIP borders, clock and four UMD color
selections, press
{Select Colors} to display the Select Colors Menu . Refer to the “ Select
Colors Menu ” section on page 208 for details.
To set up the Multiviewer’s clock, press {Clock Setup} to display the Clock Setup Menu .
Refer to the “ Clock Setup Menu ” section on page 209 for details. Note that the time is set
on the User Preferences Menu .
To turn a PIP on or off in the selected layout, highlight the row that corresponds to the
desired PIP, then press
{Mode} . In the pop-up, select On or Off . When a PIP is off, its
source, color, and UMD text assignments remain unchanged.
To assign a source to a PIP, highlight the row that corresponds to the desired PIP, then
press
{Assign Source} to display the Assign Source Keypad . Refer to the “ Assign
Source Keypad ” section on page 212 for details.
To change UMD text, highlight the row that corresponds to the desired PIP, then press
{UMD Text} to display the Pop-up Keyboard . Enter the desired text, up to eight
characters in length. In Chapter 4, refer to the “ Using the Pop-up Keyboard ” section on
page 85 for details on keyboard operations.
To change UMD color, highlight the row that corresponds to the desired PIP, then press
{UMD Color} . In the pop-up menu, select one of the four available UMD colors. Note that
the color of each button reflects the colors selected on the Select Colors Menu . Refer to
the “ Select Colors Menu ” section on page 208 for details.
Output
Setup
Select
Layout
Select
Colors
Clock
Setup
Mode
ON
Assign
Source
UMD
Text
UMD
Color
UMD 1
Note UMD colors can be used to “group” sources. For example, if
you want to visually distinguish your cameras from other
Multiviewer sources, create and assign a custom UMD color.