146
FSN-1004 • User’s Guide • Rev 00
4. Menu Orientation
System Menu
~
Press
{V Total}
to set the desired total number of vertical lines in the
output image.
•
Press
{Active and Pos}
to set the H and V active area, and the H and V position.
Four value buttons appear:
~
Press
{H Pos}
to set the start of the active area’s horizontal offset from H
sync, in pixels.
~
Press
{V Pos}
to set the start of the active area’s vertical offset from V
sync, in lines.
~
Press
{H Active}
to set the width of the active area, in pixels.
~
Press
{V Active}
to set the number of active vertical lines in the output.
•
Press
{Sync}
to adjust the horizontal and vertical sync pulse width. Two value
buttons appear:
~
Press
{H Sync}
to adjust the horizontal sync pulse width, in pixels.
~
Press
{V Sync}
to adjust the vertical sync pulse width, in lines.
•
Press
{Offset Timing}
to adjust the SOC output’s video timing relative to the
system’s native resolution. Please note:
~
If the selected SOC output format is vertically locked to the native
resolution’s vertical sync, the
{Offset Timing}
button is active.
~
If the selected SOC format is not vertically locked to the native
resolution’s vertical sync, the
{Offset Timing}
button is grayed out.
When
{Offset Timing}
is pressed, two value buttons appear, along with the
{Offset Timing Info}
button:
~
Press
{H Offset}
to offset the output’s horizontal timing (in pixels),
relative to the timing of the system’s native resolution. The adjustment
range is +/- 1/2 line.
~
Press
{V Offset}
to offset the output’s vertical horizontal timing (in lines),
relative to the timing of the system’s native resolution. The adjustment
range is +/- 1/2 frame.
•
Press
{Offset Timing Info}
to display a pop-up with the following important
information on video output offset timing:
~
If the reference input is set to
External
, H and V offsets adjust the video
output relative to the video reference input. H and V can be positive or
negative values.
~
If the reference input is set to
Free Run
, H and V offsets adjust the video
output relative to the switcher’s internal Black signal.
lìíéìí=páòáåÖ=~åÇ=pÅ~äáåÖ=m~åÉä
From the
SOC Setup Menu
, press
{Sizing and Scaling}
to display the
Output Sizing and
Scaling Panel
. This panel enables you to size and scale the universal output to a different
size, position, resolution and mask, as required.
The panel has one
Output Sizing and Scaling
section, (as shown below) plus additional
Important
Changing the H and V Totals will cause a disruption to the
SOC’s output video. Press
{Apply}
to apply changes, or
{Undo}
to reverse un-applied changes.
Active
and
Pos
Sync
Offset
Timing
Offset
Timing
Info
Sizing
and
Scaling
Содержание FSN-1004
