Barco FSN-1004 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 246

Barco FSN-1004 Скачать руководство пользователя страница 18

18

FSN-1004 • User’s Guide • Rev 00

NK==fåíêçÇìÅíáçå

About the FSN-1004

^Äçìí=íÜÉ=cpkJNMMQ

The following topics are discussed in this section:

•

•

Control GUI

•

System Configuration

lîÉêîáÉï

The FSN-1004 integrates 3G, HD, SD and computer sources in a professional multi-format
production switcher. General features include:

•

The ability to add computer inputs and HD/SD cross-conversion capability to
traditional video switcher functionality, with seamless switching and mixing.

•

The ability to select the native output video format (e.g. 720p, 1080p, 1200p). In
this manner, the switcher can operate as an HD-SDI switcher with internal SD and
computer video conversion to HD.

•

An intuitive control GUI.

•

A video processor (chassis) that uses field-serviceable cards, providing superior
input and output flexibility.

•

All cards, power supplies and fans are front-serviceable and hot-swappable.

•

Video reference input, plus auto-timing of reference locked sources (+/- 0.5 lines).

•

Six native resolution Aux outputs:

~

1280x720p@50

~

[email protected]

~

1920x1080p@50

~

[email protected] (default)

~

Barco 1200p3G@50

~

Barco [email protected]

•

Built-in test patterns.

Please note:

•

To ensure trouble-free orientation, installation and operation of your FSN-1004
switcher, please follow all procedures in the following chapters:

~

FSN-1004 Orientation

” on page 25.

~

Installation

” on page 49.

~

Menu Orientation

” on page 69.

~

System Setup

” on page 163.

~

” on page 183.

~

Multiviewer Operations

” on page 197.

~

Updating Software

” on page 215.

•

If you have questions regarding the FSN-1004, please consult with customer
service. Refer to Appendix B, “

Contact Information

” on page 233.

«
...
16
17
18
19
20
...
»

Содержание FSN-1004























































































































































































































































Отзывы:

Нет отзывов