Barco FSN-1004, Руководство пользователя, Страница: 20 / 246

20 FSN-1004 • User’s Guide • Rev 00
NK==fåíêçÇìÅíáçå
About the FSN-1004
póëíÉã=`çåÑáÖìê~íáçå
The following topics are discussed in this section:
•
FSN-1004 System
•
FSN-1004 Cards
cpkJNMMQ
=
póëíÉã
The FSN-1004 system consists of the following:
•
FSN-1004 chassis.
•
One System Card and one Crosspoint M/E Card . Refer to the “ FSN-1004
Cards ” section below for details.
cpkJNMMQ
=
`~êÇë
The FSN-1004 cards are described below.
•
System Card — this card includes:
~
Video reference input and loop through.
~
Video reference output.
~
Ethernet port (10/100).
~
One tally connector (24 contact closures).
~
One GPIO connector (four GPI ports and eight GPO ports).
In Chapter 2, refer to the “ System Card ” section on page 35 for details.
•
Crosspoint M/E Card — This card includes:
~
Crosspoint matrix.
~
Six Aux outputs.
In Chapter 2, refer to the “ M/E Card ” section on page 39 for details.
•
Five UIC (Universal Input Card)
The UIC provides two independent universal scaler channels, each of which is
used to scale input video to the switcher’s selected native output resolution. In
Chapter 2, refer to the “
Universal Input Card ” section on page 41 for details.
•
Two SOC (Standard Output Card)
The SOC provides two independent scaler output channels. Each card can
output scaled video and/or computer resolutions up to UXGA or 1920 x 1080, or
function as an additional native auxiliary output. In Chapter 2, refer to the
“
Standard Output Card ” section on page 43 for details.
•
One MVR (Multiviewer Card)
The MVR provides internal multiviewer capability, with the ability to display up to
16 source PIPs in both single and dual monitor configurations. In Chapter 2, refer
to the “
Multiviewer Card ” section on page 45 for details.
Important In Chapter 2, refer to the “ Card Slot Allocation ” section on
page 27 for details on maximum card quantities and slot
allocations in the FSN-1004 chassis.