DVD-Einheiten austauschen
Umgang mit den DVD-Einheiten 997 & 996
Beim Umgang mit den DVD-Einheiten muss das ESD-Kit benutzt werden.
An die am DVD-Mechanismus 996 angeschlossenen Kabel W77 und W76 darf
keine ESD gelangen, die die DVD-Einheit beschädigen kann.
DVD-Hauptchassis (Modul 997) austauschen
Rückwand ausbauen.
Obere Rückwand ausbauen.
Alle anderen mit dem Modul 997 verbundenen Kabel trennen. Siehe
23.
Aufgrund der ESD-Empfindlichkeit besonders vorsichtig mit W76 (72P505) &
W77 (72P504) umgehen.
- 72P504, 72P505 & 72P508 an Modul 996.
- 72P500 an PCB74.
- 72P507 an PCB32.
- 72P501 & 72P503 an PCB14.
- 72P502 an PCB2.
DVD-Hauptchassis ausbauen.
- Vier Schrauben herausdrehen. Siehe
30.
- DVD-Hauptchassis auf ESD-Matte stellen.
Neues DVD-Hauptchassis montieren.
- Die drei Schrauben festziehen.
- Die Kabel am DVD-Hauptchassis anschließen.
Wenn W76 & W77 nicht richtig angeschlossen werden, können das DVD-Hauptchassis
und der DVD-Mechanismus beschädigt werden.
Die Kabel werden am DVD-Hauptchassis angeschlossen. Siehe
23.
- 72P504, W77 wird auf einer Seite mit Schaumstoff montiert.
- 72P505
- 72P508
Rückwand montieren.
6.12 Ausbau, Deutsch
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK