Austausch von PCB5, Ablenkung
Ablenkungs-PCB und Anschlusskabel werden als eine Einheit 8000919 geliefert.
BEACHTEN, DASS DAS CHASSIS MIT DER ESD-MATTE VERBUNDEN WERDEN MUSS
Verfahren
- Netzspannung trennen.
- Bildröhre entladen. Siehe
8.
Um elektrische Schläge zu vermeiden, muss die Bildröhre entladen werden.
Mindestens 30 s nach Netztrennung bis zum Entladen der Bildröhre warten.
- Fokuskabel an PCB3 trennen.
Mit Schraubendreher Feder in Halter A eindrücken, dann Kabel herausziehen.
- Kabel 1010 und 1009 an der PCB auf der Bildröhre trennen.
- Hochspannungskabel trennen.
- 5P48, 5P49, 5P50, 5P51 und 5P73 trennen.
- PCB5 und Hochspannungskabel entfernen.
- Neue PCB5 einsetzen.
- 5P48, 5P49, 5P50, 5P51 und 5P73 anschließen.
- SCHWARZES Kabel für statischen Fokus an Anschluss A anschließen.
- ROTES Kabel für dynamischen Fokus an Anschluss B anschließen.
- G2 rot an 3P190 anschließen.
- Kabel 1010 und 1009 an der PCB auf der Bildröhre anschließen.
- Hochspannungskabel anschließen.
A B
1
2
3P190
B
A
FOCUS
1
2
SCR
EEN
5P50
5PS1
5P49
5P48
5P73
5P51
G2
Focus 2
Focus 1
H
1009
1010
Ausbau, Deutsch 6.11
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK