Format settings
Autoformat On/Off (default On)
Places the picture in the optimum position in FORMAT 2.
WSS On/Off (default On)
Wide Screen Signal
Broadcasters may transmit a WSS signal that enables the TV to change to the
correct format.
WSS is active when TV or STB in selected.
Geometry lock On/Off (default On)
On, adjusting Vertical parameters are only possible in format 3, 16:9.
Off, adjusting Vertical parameters are possible in all formats.
For adjusting Geometry please refer to Adjustments.
4:3 No/Yes (default No)
Yes, enables format 4:3 in FORMAT 1.
This feature is not described in the user guide.
PIN-code setting
In this menu it is possible to activate (ON) or deactivate (OFF) the pin code.
FBX status info
SW ver
Software version
HW id
Hardware version
Noise
Shows the strength of the TV tuner input. Zero indicates the best signal and 240 is
a very bad signal (snow).
Steep
A high number indicates a high sharpness in the signal. This means that the Digital
Luminance Peaking only has to perform small adjustments to obtain a sharp picture.
Demo Off/On (default Off)
Demo of how the compensation of movements in the picture (Motion Compensated
Picture) works.
Debug Off/On (default Off)
Red coloured bars in the side of the picture indicates Video mode and blue indicates
Movie mode.
Autoformat
WSS
On
On
Geometry lock 4:3
On
No
SW ver HW id Noise
Steep
Demo
Debug
148
251
240
126
Off
Off
Service mode, English 5.17
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK