5.32 Einstellungen, Deutsch
Einstellungen, Deutsch 5.33
Geometrie im FORMAT 1, 4:3
TV-Modus V.TAPE
Format
4:3, Format 1
Testbild
Testbild 4:3
Menüeinstellung
Picture – Brilliance 32, Colour 32, Contrast 44
Servicemenü-Einstellung
Menu – Setup 0 0 GO - Geometry adjustment
Externen VTR am TV-Gerät anschließen.
Testband 6780000 einlegen.
V.TAPE
drücken.
1. H-AM, Horizontalamplitude
Abstand H zu Q gleich Abstand T zu F einstellen = 79 ± 1,5mm
Ost/West-Einstellungen müssen für ein optimales Ergebnis mehrmals erfolgen.
2. EW-PA, EW Parabel
(auf mittlere 2/3 der Linie achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
3. EW-UC, EW obere Ecke
(auf oberes 1⁄4 verglichen mit mittleren 2/3 achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
4. EW-LC, EW untere Ecke
(auf unteres 1⁄4 verglichen mit mittleren 2/3 achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
5. EW-TZ, EW Trapez
HORIZONTAL-Abstand einstellen zwischen
obere linke und rechte Seite (ein Quadrat ein + ein Quadrat nach unten) gleich
unten: linke und rechte Seite (ein Quadrat ein + ein Quadrat nach oben)
oben links = oben rechts
unten links = unten rechts
6. EW-PG, EW Parallelogram
Abstand oben und unten (linke Seite und rechte Seite) einstellen
oben links (ein Quadrat ein und ein Quadrat nach unten)
=
unten links (ein Quadrat ein + ein Quadrat nach oben)
oben rechts (ein Quadrat ein + ein Quadrat nach unten)
=
unten rechts (ein Quadrat ein + ein Quadrat nach oben)
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK