5.30 Einstellungen, Deutsch
Einstellungen, Deutsch 5.31
Servicemenü-Einstellung
Menu – Setup 0 0 GO - Geometry adjustment
Externen VTR am TV-Gerät anschließen.
Testband 6780000 einlegen.
V.TAPE
drücken.
1. V-PS, Vertikale S-Korrektur
V-PS auf 18 einstellen, Voreinstellung.
2. H-PH, Horizontalphase
Abstand H zu Q auf ± 2 mm gleich Abstand T zu F einstellen
3. H-AM, Horizontalamplitude
Abstand H zu Q gleich Abstand T zu F einstellen = 23 ± 2,5 mm
Ost/West-Einstellungen müssen für ein optimales Ergebnis mehrmals erfolgen.
4. EW-PA, EW Parabel
(auf mittlere 2/3 der Linie achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
5. EW-UC, EW obere Ecke
(auf oberes 1⁄4 verglichen mit mittleren 2/3 achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
6. EW-LC, EW untere Ecke
(auf unteres 1⁄4 verglichen mit mittleren 2/3 achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
7. EW-TZ, EW Trapez
HORIZONTAL-Abstand einstellen zwischen
oben links und rechts (ein Quadrat ein + ein Quadrat nach unten) gleich
unten links und rechts (ein Quadrat ein + ein Quadrat nach oben)
8. EW-PG, EW Parallelogram
Abstand oben und unten (links und rechts) einstellen
oben links (ein Quadrat ein und ein Quadrat nach unten)
=
unten links (ein Quadrat ein + ein Quadrat nach oben)
oben rechts (ein Quadrat ein + ein Quadrat nach unten)
=
unten rechts (ein Quadrat ein + ein Quadrat nach oben)
9. BOW, Horizontal Bow
(auf ganze Linie achten)
VERTIKALE Linie LINKS (ein Quadrat ein) so gerade wie möglich
VERTIKALE Linie RECHTS (ein Quadrat ein) so gerade wie möglich
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK