Service counters
On/Off (times
10) shows how many times the TV has been switched off to
stand-by mode. The number is given in full tens. If the number exceeds four digits,
the four least significant digits are shown (e.g. 12834 is shown as 2834).
The other counters in the menu are shown in full days.
(Picture, Geometry adjustments and Earth field correction are described in the
section on adjustments).
Text registers
Selecting “Set” makes it possible to choose from 7 different teletext character set.
0
1
2
3
4
5
6
English
Polish
English
English
English
English
English
German
German
German
Russian
German
Arabic
Hebrew
Swedish
Swedish
Swedish
Estonian
Swedish
French
Arabic
Italian
Italian
Italian
Czech/Slovak
Italian
French
French
French
German
French
Portuguese
Serbocroat
Portuguese Lithuanian/Lettish
Portuguese
Czech/Slovak
Czech/Slovak
Turkish
Ukranian
Turkish
Rumanian
Greek
Group delay errors in certain cable aerial systems can disturb the reception of
teletext. This is prevented by connecting a filter in series with the CVBS signal
applied to the teletext decoder.
The numbers below the Register numbers R01 - R10 are programme numbers. If
all the numbers are 0, no filter has been connected on any programme number.
If you wish to connect a filter on a programme number, select a register by
pressing
l
/
n
, then press the desired programme number, and finally press
GO
.
In the example above a filter has been connected on programmes 5 and 11. The
filter is not engaged until the next time you switch to the programme in question.
Text Register setup
R01
R02
R03
R04
R05
R06
R07
R08
5
11
0
0
0
0
0
0
R09
R10
Set
0
0
0
Monitor service counters
Stand-by (days)
0000
Audio mode (days)
0000
Video mode (days)
0000
On/Off (times
10)
0000
DVD playback (days)
0000
VDC playback (days)
0000
CDAudio playback (days) 0000
DVD power on (times
10 xxxx
Loader closed (times
10) xxxx
5.16 Service mode, English
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK