Sustituya el mecanismo de accionamiento del DVD, (módulo 995 incl. W76 & W77)
Desmonte la tapa posterior.
- Desmonte la tapa posterior superior.
Desconecte los cables que van al mecanismo del DVD.
- Preste especial atención a W76 (72P505) & W77 (72P504) debido a su sensibilidad
a la descarga electrostática.
Los cables no están conectados al chasis principal del DVD.
- 72P504, 72P505 & 72P508. Ver figura
➢
23.
Desmonte el mecanismo del DVD.
- El mecanismo del DVD está sujeto solamente con dos tornillos. Asegúrese de que
no caiga cuando quite los tornillos.
- Afloje los dos tornillos (S) y desmonte el mecanismo del DVD. Ver figura
➢
23.
- Desconecte el cable que va a la PCB75, 76P436. Ver figura
➢
24.
- Coloque el mecanismo del DVD en la alfombrilla de protección antiestática.
Preste especial atención a W76 & W77 debido a su sensibilidad a la descarga
electrostática.
Desmonte el mecanismo de accionamiento del DVD.
- Retire los 6 tornillos que sujetan el mecanismo de accionamiento del DVD.
Ver figura
➢
31.
- Abra el cargador del DVD.
- Desmonte el mecanismo de accionamiento del DVD. Ver figura
➢
32.
Monte el nuevo mecanismo de accionamiento del DVD.
- Coloque el nuevo mecanismo del DVD en la alfombrilla de protección antiestática.
Preste especial atención a W76 & W77 debido a su sensibilidad a la descarga
electrostática.
- Monte el mecanismo de accionamiento del DVD en el mecanismo del DVD.
- Abra el cargador del DVD.
- Apriete los 6 tornillos. Ver figura
➢
31.
Conecte el cable de la PCB75.
- 76P436. Ver figura
➢
24.
Monte el mecanismo del DVD.
- Preste especial atención a W76 & W77 debido a su sensibilidad a la descarga
electrostática.
- Si W76 & W77 no están conectados correctamente, el chasis principal y el
mecanismo del DVD pueden dañarse.
- Monte el mecanismo del DVD y apriete los dos tornillos (S). Ver figura
➢
23.
- Conecte los cables al chasis principal del DVD.
- Si W76 & W77 no están conectados correctamente, el chasis principal y el
mecanismo del DVD pueden dañarse.
Los cables están conectados al chasis principal del DVD. Ver figura
➢
23.
- 72P504, W77 se monta con espuma a un lado.
- 72P505.
- 72P508.
Alinee el mecanismo del DVD.
- Ajuste el mecanismo del DVD hasta que esté alineado con la carcasa.
- Los tornillos de alineación para la alineación final están situados debajo de los
tornillos de montaje. Ver figura
➢
23.
Instale la tapa posterior.
Desmontaje, Español 6.35
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK