5.106 Ajustes, Español
Ajustes, Español 5.107
Valor nominal en dB Graves Agudos
+2,00 dB
1,57 V
2,04 V
+1,75 dB
1,62 V
2,10 V
+1,50 dB
1,67 V
2,16 V
+1,25 dB
1,71 V
2,23 V
+1,00 dB
1,76 V
2,29 V
+0,75 dB
1,82 V
2,36 V
+0,50 dB
1,87 V
2,43 V
+0,25 dB
1,92 V
2,50 V
0,00 dB
1,98 V
2,57 V
- 0,25 dB
2,04 V
2,65 V
- 0,50 dB
2,10 V
2,72 V
- 0,75 dB
2,16 V
2,80 V
- 1,00 dB
2,22 V
2,88 V
- 1,25 dB
2,29 V
2,97 V
- 1,50 dB
2,35 V
3,05 V
- 1,75 dB
2,42 V
3,14 V
- 2,00 dB
2,49 V
3,24 V
- Conecte un oscilador de audio al conector V.TAPE 14P21.
14P21 pin 2
Entrada derecha audio
14P21 pin 4
Toma audio a tierra
14P21 pin 6
Entrada izquierda audio
- Pulse
VTAPE
y recorra la
LIST
hasta que la pantalla muestre
SPEAKER
, y luego
pulse
1
(modo de sonido 1 - altavoces internos del televisor).
- Los controles de sonido del televisor, bajos, agudos y balance, deben estar no
regulados (0), y la sonoridad debe desactivarse. Pulse:
MENU 4
(o
3
)
2 1
y ajuste
pulsando
n
,
l
,
p
o
m
.
- Conecte un voltímetro de audiofrecuencia a 10P57 pin 1 (entrada derecha) o pin 4
(entrada izquierda) con tierra en el pin 2.
- Si tiene que ajustar el nivel de agudos, fije la señal del oscilador de audio a 10kHz
y ajuste el nivel de la entrada a 250mV, mediante la salida del oscilador de audio y
el volumen
r
o
u
en el Beo4.
- Si tiene que ajustar el nivel de bajos, fije la señal del oscilador de audio a 1kHz y
ajuste el nivel de la entrada a 250mV, mediante la salida del oscilador de audio y el
volumen
r
o
u
en el Beo4.
- Conecte un voltímetro de audiofrecuencia en la salida de la unidad en cuestión
(los altavoces no necesitan estar conectados durante el procedimiento de ajuste):
Bajos:
10P77 pin 1
Salida derecha bajos
10R402 Consulte
7
10P77 pin 3 Toma tierra derecha bajos
10P78 pin 1
Salida izquierda bajos
10R404
10P78 pin 3
Toma tierra izquierda bajos
Agudos: 10P77 pin 2
Salida derecha agudos
10R403
10P77 pin 3 Toma tierra derecha agudos
10P78 pin 2
Salida izquierda agudos
10R405
10P78 pin 3
Toma tierra izquierda agudos
- Ajuste hasta que el voltaje de salida del altavoz corresponda al voltaje encontrado
en la tabla de niveles de altavoces mediante el valor nominal estampado en la
parte posterior del altavoz.
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK