In dem gezeigten Beispiel wurden Filter bei Programm 5 und 11 eingesetzt. Das
Filter wird erst beim nächstfolgenden Schalten zum betreffenden Programm
eingeschaltet.
Format settings
Autoformat On/Off (Voreinstellung On)
Bringt das Bild in FORMAT 2 in die optimale Position.
WSS On/Off (Voreinstellung On)
Wide Screen Signal
Sender können ein WSS-Signal ausstrahlen, mit dem das TV-Gerät das richtige
Bildformat einstellen kann.
WSS ist aktiv, wenn TV oder STB gewählt ist.
Geometry lock On/Off (Voreinstellung On)
On: Einstellung der Vertikalparameter nur in Format 3, 16:9, möglich.
Off: Einstellung der Vertikalparameter in allen Formaten möglich.
Zur Geometrieeinstellung siehe Einstellungen.
4:3 No/Yes (Voreinstellung No)
Yes: aktiviert Format 4:3 in FORMAT 1.
Diese Funktion ist in der Bedienungsanleitung nicht beschrieben.
PIN-code setting
In diesem Menü kann der PIN-Code aktiviert (ON) bzw. deaktiviert (OFF) werden.
FBX status info
SW ver
Softwareversion
HW id
Hardwareversion
Noise
Zeigt die Signalstärke am TV-Tunereingang. Null gibt das stärkste und 240 das
schwächste Signal (Schnee) an.
Steep
Ein hoher Wert zeigt eine hohe Schärfe im Signal an. Dies bedeutet, dass Digital
Luminance Peaking nur geringe Korrekturen vornehmen muss, um ein scharfes Bild
zu erzielen.
Autoformat
WSS
On
On
Geometry lock 4:3
On
No
SW ver HW id Noise
Steep
Demo
Debug
148
251
240
126
Off
Off
Service-Modus, Deutsch 5.41
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK