Sostituire il meccanismo DVD (modulo 996, inclusi i cavi W75, W76 e W77)
Coperchio superiore del DVD.
È necessario trasferire il coperchio superiore sul nuovo meccanismo DVD.
Sollevare il caricatore DVD.
- Aprire il caricatore DVD premendo il tasto “LOAD”.
Per aprire manualmente il caricatore DVD, tirarlo con attenzione verso l’alto
oppure far girare l’ingranaggio nel motore.
Rimuovere il pannello posteriore.
- Smontare il pannello posteriore superiore.
Scollegare i cavi nel meccanismo DVD.
Fare attenzione ai cavi W76 (72P505) e W77 (72P504) poiché sono sensibili alle
scariche elettrostatiche.
I cavi sono scollegati dal telaio principale del DVD.
- 72P504, 72P505 e 72P508. Vedere l‘illustrazione
➢
23.
Smontare il meccanismo DVD.
Il meccanismo DVD è fissato con due viti. Fare attenzione a non far cadere l’unità
DVD durante la rimozione delle viti.
- Allentare le due viti (S), quindi smontare il meccanismo DVD.
Vedere l’illustrazione
➢
23.
- Scollegare il cavo collegato al PCB75, 76P436. Vedere l’illustrazione
➢
24.
- Posizionare il meccanismo DVD sul tappetino di protezione dalle scariche elettrostatiche.
Fare attenzione ai cavi W76 e W77 poiché sono sensibili alle scariche elettrostatiche.
Trasferire il coperchio superiore.
- Rilasciare i due fermi a scatto. Vedere l’illustrazione
➢
26.
- Controllare che il fermo sia alloggiato nel nuovo meccanismo DVD.
Vedere l’illustrazione
➢
28.
- Montare il coperchio.
Accertarsi che le alette di guida entrino nei fori. Vedere l’illustrazione
➢
29.
Collegare il cavo dal PCB75.
- 76P436. Vedere l’illustrazione
➢
24.
Montare il nuovo meccanismo DVD.
Fare attenzione ai cavi W76 e W77 poiché sono sensibili alle scariche elettrostatiche.
Se i cavi W76 e W77 non sono collegati correttamente, il telaio principale del DVD
può danneggiarsi.
- Montare il meccanismo DVD, quindi fissare le due viti (S). Vedere l’illustrazione
➢
23.
Collegare i cavi al telaio principale del DVD.
I cavi sono collegati al telaio principale del DVD. Vedere l’illustrazione
➢
23.
- 72P504, W77 è montato con del polistirolo su un lato.
- 72P505.
- 72P508.
Allineare il meccanismo DVD.
- Regolare il meccanismo DVD fino a quando questo non risulti allineato al mobiletto.
Le viti per l’allineamento finale sono collocate al di sotto delle viti di montaggio.
Vedere l’illustrazione
➢
23.
Montare il pannello posteriore.
Scomposizione, Italiano 6.27
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK