Bale Band-It GFC 100, Руководство оператора

Страница: 53 / 108

Operator’s Manual 48
- Check the air gap distance between the Vertical Plunger reed switch and the magnet.
The distance should be a maximum of 3/8 inch (9 mm). If it is within the suggested
range then the sensor bar needs to be replaced.
If the Vertical Plunger cylinder is partially retracted,
- Check that a bale or foreign object is not preventing the Vertical Plunger cylinder
from retracting.
- Hydraulic power or hydraulic return has been disconnected or shut off from machine.
This circuit has a 2-position valve and cannot be partially extended unless power or
return has been disconnected or shut off.
If the Vertical Plunger cylinder is still extended,
- Check that hydraulic power is still on to the machine and that return line is still
connected.
- Check that a bale or foreign object is not preventing the Vertical Plunger cylinder
from retracting.
- Check that the directional valve is not stuck.
018 Waiting for Kicker reed switch to be off.
Note: Before the machine retracts the Kicker cylinder, the Kicker reed switch is in front
of the first magnet mounted in the round plastic. When the machine retracts the Kicker
cylinder it rotates the round plastic, moving the first magnet away from the switch,
which turns the Kicker reed switch off. This is what the machine is waiting for.
If the Kicker cylinder is fully retracted,
- Loosen nuts on Kicker reed switch and hold the switch away from any magnets or
metal for approximately 10 seconds. Check tractor box display to see if it is still
displays “018”. If it does, lightly tap the switch on something to free up the stuck
switch. The switch may need to be replaced if this problem continues.
If the Kicker cylinder is partially retracted,
- Check that a bale or foreign object is not preventing the Kicker from retracting.
- Hydraulic power or hydraulic return has been disconnected or shut off from machine.
This circuit has a 2-position valve and cannot be partially extended unless power or
return has been disconnected or shut off.