Bale Band-It GFC 100, Руководство оператора

Страница: 18 / 108

Operator’s Manual 13
8. Thread the strapping through the slot under the bearing.
9. Thread the strapping around the bearing. For easier threading, bend a radius in the strapping.
This will allow the strapping to flow easily around the bearing.
10. Thread the strapping under the roller and in the channel of the Strap Guide Arms. For easier
threading, straighten the strapping before threading under the roller. This will allow the strapping
to flow easily through the Strap Guide Arm and out the other side.
11. As the strapping is being threaded through the Strap Guide Arm, it must be threaded on top
of the pivot point of the Strap Guide Arm Finger.