Bale Band-It GFC 100, Руководство оператора

Страница: 56 / 108

Operator’s Manual 51
- Check that a bale or foreign object is not preventing the Horizontal Plunger cylinder
from extending.
- Hydraulic power or hydraulic return has been disconnected or shut off from machine.
This circuit has a 2-position valve and cannot be partially extended unless power or
return has been disconnected or shut off.
If the Horizontal Plunger cylinder is still retracted,
- Check that hydraulic power is still on to the machine and that return line is still
connected.
- Check that a bale or foreign object is not preventing the Horizontal Plunger cylinder
from extending.
- Check that the directional valve is not stuck.
022 Vertical Plunger Up sensor bar switch is stuck on.
Note: Before the machine extends the Vertical Plunger cylinder it does a safety check
on the Vertical Plunger Up sensor bar switch. It checks to see if the sensor bar switch is
stuck on. If it is, it will wait until the sensor bar switch is off before continuing the
operation.
The switch is located at the top of the sensor bar at the white mark.
If Vertical Plunger cylinder is retracted,
- Tap on Vertical Plunger Swing sensor bar switch until display number changes or
replace the sensor bar.