Axel WOLF 1MS Скачать руководство пользователя страница 222 | Manualshive

Страница: 222 / 229

Axel WOLF 1MS Скачать руководство пользователя страница 222

TECHNICAL APPENDIX

| TECHNICAL APPENDIX

222

16.11.28

Format and Import/Export configuration

Available in the front panel display a group of new functions to handle the SD card.

Please before starting any operation format again it. The SD card will be formatted with the EXT3 file system.
This file system is not Microsoft windows compatible (so the SD card will be read only inside linux systems), but more
robust respect the old FAT32.

If Wolf2ms find a FAT32 file system (or another one different from EXT3) doesn’t allow to operate.

Selecting the “export” function the configuration will be exported in the SD card.
Selecting the “import” function the configuration will be imported from the SD card.

Automatically Wolf2ms “export” the configuration in the SD card after about 20 minutes every parameter changes and/or
after 20 minutes the startup.
That means in the SD card should be always available the a configuration, manually or automatically saved.

Inserting a different SD in a wolf2ms , will be available 20 minutes to Import the SD card configuration (after this time
Wolf2ms will rewrite on it its one).

«
...
220
221
222
223
224
...
»

Содержание WOLF 1MS






































































































































































































































Отзывы:

Нет отзывов