Axel WOLF 1MS, Руководство пользователя, Страница: 183 / 229

TECHNICAL APPENDIX
| TECHNICAL APPENDIX 183
16.11.13
RDS TP Data test (Tuner-1 Tuner-2)
This test checks alarms and traps on a Radio with TP=ON tuned on frequency 100.5MHz.
The test was carried out on both tuners.
System checks received TP and compares it with TP Ref. If a match is found an alarm condition raises up.
In Static mode we have set a TP Ref Mask to OFF with Validation time of 15 sec. and Hold time equal to 25 sec. (see fig.
below)
Under the alarm condition the RDS alarm led (we have associated the TP alarm to the panel led Rds error) on the panel
must be on (not flashing) and clicking on the channel number of the correspondent tuner the RDS error will be displayed
(“RDS DATA”).
Tested in Scan mode with 3 frequencies:
F1: 100.5 MHz
F2: 95.3 MHz
F3: 96.7 MHz
and TP Ref Mask: OFF as depicted below.
Validation Time = 15 sec. Hold Time = 25 sec.