Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 88 / 398

2
Installing the Hardware and Setting Up Your System
88
Setting Up Your System
Once you have cabled up your AirSpeed Multi Stream, and the system is powered on, you
must perform some basic system setup before you configure the software.
The default Administrator password is blank. Press Enter. Do not try to type a password.
n
Some USB flash devices might not appear in a Safely Remove Hardware dialog box even
though they are plugged in. In addition, it might take several seconds for a USB device to be
available to the system.
AirSpeed Multi Stream System Setup Checklist
The following table provides a checklist of tasks that must be performed when setting up
your AirSpeed Multi Stream system.
Before beginning the upgrade or installation process, be sure to close all running AirSpeed
Multi Stream applications on the server. The most convenient way to do this is to close the
Monitor application. When closing the Monitor application you will see a dialog box asking
you to confirm that you want the AirSpeed Multi Stream application(s) closed. By selecting
‘Yes’, the AirSpeed Multi Stream application(s) will be closed and will not restart
automatically.
n
Make sure that you only close AirSpeed Multi Stream applications when they are idle, with
no records, playouts or transfers in progress.
‰
Change the computer name, as described in the topic “Changing the Computer Name” on
page 89 of this guide.
‰
Adjust the date, time, and time zone, as described in the topic “Adjusting the Date, Time and
Time Zone” on page 90 of this guide.
‰
Based on whether you are setting up a new system or reimaging an existing system, you
need to either configure or reconfigure your media drives for RAID 0 striping.
If you are setting up a new system in which the media drives have not yet been RAID 0
striped in Windows, you should follow the procedure as described in
“Configuring Media
Drives for RAID 0 Striping” on page 90 .
If you are reimaging an existing system in which the media drives have already been RAID
0 striped in Windows, you should follow the procedure as described in
“Reconfiguring
Media Drives for RAID 0 Striping (for Previously Striped Drives)” on page 92 .
‰
Verify your network connection, as described in “Verifying Your Network Connection” on
page 94 .