Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 36 / 398

1
AirSpeed Multi Stream Overview
36
Edit While Capture
When using a Team Configuration, you can edit media while it is being captured and
transferred to shared storage. This allows you to start editing new media as soon as possible.
There are two different ways you can take advantage of Edit While Capture:
• Drag and drop the clip into the editor bin (Edit While Capture with Drag and Drop)
• Open the master clip directly from shared storage during the transfer (Edit While
Capture with Auto Transfer)
Edit While Capture with Drag and Drop
- In this workflow, the Remote Console
Standalone allows you to drag and drop one or more clip(s) to the editor bin. Once the clip(s)
are in the Editor bin, they become partially on-line, allowing you to create sequences with
the Avid Editor. The partially on-line media continues to grow until the capturing clip
completes. Subsequently, the partially on-line clip is closed and the entire media will be
available.
Edit While Capture with Auto Transfer
– In this workflow, the media that is captured on
the AirSpeed Multi Stream will be transferred directly to storage. The metadata (.aaf file) for
the media is transferred to a predefined Avid MasterClips location (a folder on the ISIS
5000/7000 workspace). From the editor, you would then import this .aaf file and the media
would be available partially on-line. The partially on-line media will continue to grow until
the capturing clip completes. At this point, you must reimport the same .aaf file to close out
the file.
n
These workflows can only be used with ISIS 5000 or ISIS 7000 shared storage.
MediaNetwork is not supported.
Before you can perform an Edit While Capture, your system must have been set up using a
Team Configuration (AirSpeed Multi Stream with Shared storage).
n
For information on how many Edit While Captures (EWCs) you can perform at the same
time on one AirSpeed Multi Stream, see the Avid AirSpeed Multi Stream Performance
Guidelines.
c
This is a system intensive process. It is recommended that you limit other activities on
the AirSpeed Multi Stream system (such as playback, re-ingest transfers, and so on)
while performing an EWC.
For more information on Edit While Capture workflows, see the following topics:
• “Performing an Edit While Capture (EWC) with Drag and Drop” on page 319
• “Performing an Edit While Capture (EWC) with Auto Transfer” on page 320