Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 187 / 398

Team Configuration
187
Configuring the Integration Service on the AirSpeed Multi Stream
The next step is to set up the Integration Service on the AirSpeed Multi Stream for use in a
Team configuration.
There are six stages (one optional) to configure the Avid Service Configuration for Team
configuration. They are listed in the checklist below and each is described in detail following
the checklist:
Enabling Standalone Mode
The next step is to enable Standalone mode in the Avid Service Configuration.
To enable Standalone mode:
1. On the AirSpeed Multi Stream system, select
Start > Programs > Avid > Avid
Framework > Avid Service Configuration .
The Avid Service Configuration dialog box opens to the Service tab, and a list of all of
the servers connected to the Avid Service Framework appears. In the Hosts column,
your AirSpeed Multi Stream system name appears in the list in Bold type (if you are
connected to that system).
‰
Enable Standalone Mode. See
“Enabling Standalone Mode” on page 187
.
‰
Set up User profiles. See “Setting Up User Profiles” on page 189 .
‰
Set up Record and Destination templates. See “Setting Up Record and Destination
Templates” on page 190 .
‰
Select Default templates. See “Selecting Default Templates” on page 194 .
‰
Set up Inventory rules. See “Setting Up Inventory Rules” on page 195 .
‰
(Optional) Install the AirSpeed Multi Stream Device Service. See “(Option) Installing the
AirSpeed Multi Stream Device Service” on page 198 .