Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 100 / 398

3
General Configuration Procedures
100
AirSpeed Multi Stream Configuration Checklist
The following table provides a checklist of tasks that must be performed when configuring
your AirSpeed Multi Stream.
n
The tasks in this checklist apply to all configurations and environments.
n
Depending on your site’s configuration, some tasks are optional.
‰
(Option) If your site uses Avid iNEWS Command or CaptureManager, or Interplay
Capture to control AirSpeed Multi Stream channels for capture or playout, you need to
install the Interplay AirSpeed Multi Stream Device Service on the AirSpeed Multi
Stream server. For more information, see
“(Option) Installing the AirSpeed Multi Stream
Device Service” on page 101 .
‰
Create a new database and set a default database, as described in “Creating a New
Database in the AirSpeed Multi Stream Application” on page 102 .
‰
Configure Channels on AirSpeed Multi Stream, as described in “Configuring Channels”
on page 105 .
‰
(Option) If you are using Avid iNEWS Command to control AirSpeed Multi Stream, you
must configure AirSpeed Multi Stream Channels for Remote Control with Avid iNEWS
Command , as described in
“Configuring Channels for Remote Control with Avid
iNEWS Command” on page 117 .
‰
(Option) Configure Communication Protocols in AirSpeed Multi Stream, assuming you
have external devices that will control AirSpeed Multi Stream (such as automation
systems), as described in
“Configuring Communication Protocols in AirSpeed Multi
Stream” on page 121 .
‰
(Option) Configure General Purpose Interface (GPI) Inputs and Outputs in AirSpeed
Multi Stream, as described in
“Configuring General Purpose Interface (GPI) Inputs and
Outputs” on page 123 .
‰
Configure your Avid Editor to work with AirSpeed Multi Stream, as described in
“Locking Channel Assignments” on page 129 .