Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 270 / 398

9
AirSpeed Multi Stream Studio and Playout
270
n
If you are adding an individual AirSpeed to the Send to Playback list, type the AirSpeed Host
Name in the Server text box as it appears in the Setup > Network tab of the AirSpeed UI.
6. Type the name of your workgroup in the Workgroup text box. This can be any name you
give your workgroup. This entry is case sensitive.
7. Click OK.
Using the Studio
When the Avid editing application starts and connects to the Avid Unity environment, the
playback devices are made available to the Avid editing system. These devices are displayed
in the Transfer > Send To Playback menu. If your Studio was not available when you started
the Avid editing application, select Select Transfer > Reconnect To Server.
For more information, see the following topics:
• “Connect to Playout Server or Studio” on page 270
• “Send to Playout Server or Studio” on page 271
Connect to Playout Server or Studio
The Studio is defined in the TMClient.ini tab on the Avid editing system. The Avid editor
determines if the playback device is a Studio by the naming convention; see
“Adding the
Studio to Your WorkGroup” on page 268 . This determination happens when the Avid editor
is started. If you are already running the Avid editing application and want to make sure the
playback servers are available, select “Reconnect To Server” in the Avid editor.
To connect or reconnect to transfer server:
t
Select Transfer > Reconnect to Server.