Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 197 / 398

Team Configuration
197
6. (Option) If you want to generate a low-res proxy after playback transfer completes, click
the “ Generate a local MPEG-1 proxy after playback transfer completes? ” check
box. Otherwise, leave it unchecked.
n
Low res proxies are for local playback on the AirSpeed Multi Stream only.
c
Under heavy loads, generating proxies while ingesting or playing out can inhibit system
performance. Therefore, it is recommended to not generate proxies while recording or
playing out.
7. (Option) If you want to begin delete at a specific metric based on time, click the “ Begin
delete
” check box, and type a percentage in the field for each option that you want to
specify deletion parameters.
Media will delete starting with the oldest clips first.
8. (Option) If you want to delete all inventory daily, select the “ Delete all inventory daily
at (24 hour HH:MM)
” check box, and enter a time when you want to delete your
inventory in hour and minute (HH:MM) format.
9. Make sure that the “
Restart transfer engine daily at
” check box is selected, and enter a
time when you want the Transfer Engine to restart in hour and minute (HH:MM) format.
n
This enables the application to handle larger file counts on the Shared storage. By creating
additional folders, the files will be listed in more manageable groups.
10. Click Apply .
11. Close the AirSpeed Multi Stream Service Configuration dialog box.
Next, If your site uses Avid iNEWS Command to control AirSpeed Multi Stream channels
for capture or playout, you need to install the Interplay AirSpeed Multi Stream Device
Service on the AirSpeed Multi Stream server. For more information, see
“(Option) Installing
the AirSpeed Multi Stream Device Service” on page 198 .