Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 32 / 398

1
AirSpeed Multi Stream Overview
32
Media Destination Selection
AirSpeed Multi Stream uses Destination templates for selected channels to direct storage to
particular workspaces on various storage locations. There is also a default location in the
event you want to perform a crash record. AirSpeed Multi Stream does not remember the
last storage destination set.
Captured media is first stored on the internal drives of the AirSpeed Multi Stream and then
copied to the selected Avid Unity workspace. To avoid reaching the internal drive’s
maximum storage capacity, AirSpeed Multi Stream can be configured to automatically
delete the media that has been saved to a workspace. The Auto Delete setting controls when
to delete the media stored on the AirSpeed Multi Stream server and how much media to
delete. For more information on setting Auto Delete, see
“Configuring the Avid Service
Configuration for Interplay Workgroup” on page 120 . When the workspace is full, the
AirSpeed Multi Stream continues to capture until the internal drives are filled. Once the
internal drives are full, the AirSpeed Multi Stream stops capturing.
Protecting Workspaces
Protect a workspace against drive failure by duplicating files on more than one drive (a form
of mirroring).
For best results, do not use unmirrored (unprotected) workspaces. Performance and behavior
is unpredictable.
For more information on protecting workspaces, see your Avid Unity ISIS or MediaNetwork
documentation.
n
For data integrity of your media, Avid recommends that you always use protection to avoid
data loss.
Headframes
AirSpeed Multi Stream supports the display of headframes in Asset Management systems.
Clips transferred to the Asset Management system display headframes.