Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 260 / 398

8
Working with Clips
260
Clip Tab Settings
Setting Descriptions
Clip Name File name of the clip itself. To generate a new clip, leave this field blank.
Master Clip If this is a sub-clip, the name of the master clip from which it was taken.
In In-point of this clip. Use the shortcut Ctrl+I to set the in-point.
Out Out-point of this clip. Use the shortcut Ctrl+O to set the out-point.
Duration Duration of this clip.
Loop In Point in the clip where looping starts.
n
This functionality is available for SD and DNxHD clips only. You
cannot loop MPEG-2 HD clips.
Master Clip Master clip, if any
Base TC Base timecode used by the clip for time calculations
TC Src Check box that identifies the Timecode source for this clip. Options
include:
• None
• TOD (Time-of-Day)
• VITC
Looping How many times to loop the clip.
n
This functionality is available for SD and DNxHD clips only. You
cannot loop MPEG-2 HD clips.
Server Workstation on which this clip resides