Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 150 / 398

4
Configuring the Software in a Workgroup Environment
150
3. (Option for CaptureManager only) Configure the AirSpeed Multi Stream Device
Service by doing the following:
a. On the Hosts tab, type the CaptureManager host name in the Hostname field, and
then the System Administrator password, and click OK. If you have not created one
yet, leave the space blank and click OK.
b. On the Device Settings tab, enter the second workgroup, and then enter the name of
the Command workgroup.
c. If the AirSpeed Multi Stream will be controlled by two Command systems, enable
the second system and enter the numerical value of that system, such as 2. Options
include 1-10. The default Command system number is 1.
d. If using CaptureManager for ingest control, enable it by clicking Yes next to the
“Enable Avid Interplay CaptureManager” field and entering the hostname of the
CaptureManager server in the CaptureManager System Service field.
e. Click Apply.
n
Upon applying the new settings, and if the CaptureManager is enabled, the system will
append a port number to the end of the hostname you entered for the CaptureManager
Server.
For more information, see the topic “Configuring the AirSpeed Multi Stream Device
Service” in the
Avid iNEWS Command Configuration Guide .
4. Open the Workstation Service for Command, CaptureManager, or Interplay Capture,
and change any desired settings for your specific site. Possible settings that you might
want to change include the following:
a. Enable/disable time sync
b. Enable/disable health monitoring
c. Service Starter Service
5. Launch the Avid Interplay Health Monitor and do the following:
a. Check the AirSpeed Multi Stream’s general health
b. Check Command’s general health
For more information on using the Interplay Health Monitor, see Chapter 7 of the Avid
Service Framework User’s Guide .