Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 52 / 398

1
AirSpeed Multi Stream Overview
52
For a description of each connector, see the following table.
Label Function
EXPANSION PORT 1 and 2 A general purpose input/output for remotely controlling the
AirSpeed Multi Stream, 29-pin DVI connector. For example,
you can invoke a GPI command to start capturing and another
one to stop capturing. Each expansion port also provides 4
LTC out each.
CONSOLE The RS-232 port is used for terminal access to the AirSpeed
Multi Stream.
VGA The Video graphic array (VGA) connection is used for
connecting a monitor to the AirSpeed Multi Stream.
SERIAL There are 8 Serial Remote RJ-45 connections, used for
controlling other devices.
USB Universal serial bus (USB) 2 connections, used primarily for
compatible mouse and keyboard inputs. The port can also be
used with a trackball or other compatible pointing device.
ETHERNET
(Ethernet control interface) 1000 BASE-T data port Ethernet connection to the
Avid Unity network. Connects to a network switch and
provides a fast link to the Avid Unity environment.
There are 4 Ethernet ports, although only 2 (Ports 1 and 2) are
supported for communicating with the shared storage (Avid
Unity ISIS, or MediaNetwork).
Port 4 is reserved for use for connecting and configuring the
AirSpeed Multi Stream over a network interface. For more
information, see
“Connecting to AirSpeed Multi Stream Over
the Network” on page 84 .