Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 181 / 398

Team Configuration
181
Configuration Requirements for AirSpeed Multi Stream
Each AirSpeed Multi Stream must be configured with the following:
• Site-specific settings need to be applied for the AirSpeed Multi Stream to operate in a
Team configuration. Each AirSpeed Multi Stream server that is installed needs to be
uniquely configured.
• You must create a site-specific host name/domain name of the AirSpeed Multi Stream,
including an IP address and mask for the network interface.
• The Shared Storage Client for Avid Unity ISIS 5000 or ISIS 7000.
n
Unity MediaNetwork and Macintosh clients are not supported.
• Avid strongly recommends that when you are set up in a Team configuration, you must
time sync the AirSpeed Multi Stream(s), editor system(s), and your ISIS shared storage
system together. Otherwise, you run the risk of having media appearing to be off-line.
Once these requirements are met, and you have installed all of the necessary hardware and
software for your site, you can configure the AirSpeed Multi Stream. For more information
on specific tasks involved when configuring your AirSpeed Multi Stream for a Team
configuration, see
“AirSpeed Multi Stream Configuration Checklist” on page 182 .
Software Requirements for the Avid Editing Client
In order to work with AirSpeed Multi Stream in a Team configuration, each Avid Editing
client must have the following software loaded:
• an Avid editing application (Media Composer, NewsCutter, or Symphony)
• Standalone AirSpeed Multi Stream Remote Console application
• The Shared Storage Client for Avid Unity ISIS
• Avid Interplay Transfer Engine (client)
• Avid Framework (installed with the AirSpeed Multi Stream application)