Avid Technology AirSpeed Multi Stream, Инструкция по установке и эксплуатации

Страница: 90 / 398

2
Installing the Hardware and Setting Up Your System
90
Adjusting the Date, Time and Time Zone
When your system ships out, it might not have the correct date, time and time zone set up for
your site. You must determine if this information must be changed and then change it, if
necessary. This topic contains information on how to adjust the date, time, and time zone for
your site.
To adjust the date, time and time zone:
1. Double-click on the system time in the lower right corner of the screen.
The Date and Time Properties dialog box opens.
2. In the Date & Time tab, change the date and time to be accurate for your site.
3. Click on the Time Zone tab.
4. Select the time zone for your site from the drop menu.
5. Click OK to close the dialog box.
6. The next step is to configure your media drives for RAID 0 Striping. For more
information, see “Configuring Media Drives for RAID 0 Striping” on page 90 .
Configuring Media Drives for RAID 0 Striping
With all of your media drives inserted, and the AirSpeed Multi Stream powered on, you need
to configure your media drives for RAID 0 striping within Windows.
n
If this system has previously configured for RAID 0 striping wihtin Windows, and you are
reimaging the system, you must reconfigure your Media drives for RAID 0 Striping within
Windows. For more information, see
“Reconfiguring Media Drives for RAID 0 Striping (for
Previously Striped Drives)” on page 92 .
n
Make sure there are no external disks, DVD drives, including USB DVD drives attached to
the system.
n
Make sure that all Avid applications or Windows applications ( such as Disk Management )
that would use the Media disk drive are not running.
For more information, see “Creating RAID 0 Striping in Windows” on page 91 .