Avermedia NX 8000 series, Руководство пользователя

Страница: 75 / 201

67
- I/O Control
To setup the sensor and relay devices that is installed on IP camera.
9
Sensor Setting
To setup sensor that is embedded on the camera.
1. Click the drop-down list and select the sensor ID number.
2. Enter sensor name in
Name
column
3. The system automatically detects the camera and input relates information. In the
Content section, enter sensor description.
4. In the test section, click
Test
to check the sensor status. Red is high and Green is
low.
5. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.
9
Relay Setting
To setup relay device that is embedded on the camera.
1. Click the drop-down list and select the relay ID number.
2. Enter relay name in
Name
column
3. The DVR system automatically detects the camera and input relates information. In
the Content section, enter relay description.
4. In the test section, click
Test
to trigger relay. Red is high and Green is low.
5. Click
OK
to exit and accept the setting and
Cancel
to exit without saving the setting.