Avermedia NX 8000 series, Руководство пользователя

Страница: 136 / 201

128
To Setup FTP Setting:
1. Beside the File Transmission via FTP check box, click
Detail
.
2. In the FTP Setting dialog box, enter the FTP IP, port,
user ID and password.
3. Click
OK
to exit and save the setting and
Cancel
to exit
without saving the setting.
To Setup Alarm Recording Setting:
1. Beside the Start Recording check box, click
Detail
.
2. In the Alarm Recording Setting dialog box, select
the camera to enable/disable video recording.
Enable
All
to select all cameras.
3. In the Frame Rate selection, select
As Setting
to
record the number of frames based on the
Recording Setting or
Max
to record the maximum
of frames based on the available speed.
4. In the Stop Recording after text box, set the
number in second for the program to continue
recording after the alarm has ended.
5. Click
OK
to accept the new settings and
Cancel
to exit without saving.
To Setup Alarm SOP:
Beside the Alarm SOP check box, click
Detail
. In the step
text boxes, type the standard protocol when the alarm is
activated. When the alarm is activated, the Standard
Operation Procedure dialog box will appear. Just click
Next
to see the next instruction,
Back
to see the previous
instruction,
Finish
to end and
Abort
to terminate.
To Setup CMS Setting
Beside the Send to CMS check box, click
Detail
. In
the CMS Setting, select the camera to enable/disable
sending the video to CMS. Enable
All
to select all
cameras. Then, click
OK
to accept the new settings
and
Cancel
to exit without saving.