Avaya IP Ofice 8.0, Быстрая установка

Страница: 99 / 256

IP Office Basic Edition - Quick Mode Installation Page 99
15-601042 Issue 24i (20 December 2011) IP Office 8.0
Initial Configuration Using IP Office Manager:
6.1 Entering Licenses
For IP500 V2 control units, license files can be pre-loaded onto the System SD card. Those licenses will then be
merged with the configuration when the control unit is powered up. Otherwise for all control units, licenses are entered
into the configuration using IP Office Manager. In addition to the methods below, license can also be added by placing the
addition licenses as a text file on the System SD card.
You must ensure that the licenses being entered have been issue against the FK serial number of the System SD card
fitted in the system. Each license is a unique 32-character string based on the feature being licensed and the serial
number of the SD card plugged into the system control unit.
Entering licenses manually is liable to errors caused by miskeying the correct 32-character string.
Entering Licenses
1. Start IP Office Manager and receive the configuration from the IP Office system.
2. From the Admin Tasks list select System and then License Management.
·
If the Admin Tasks list is not visible, select View and deselect Hide Admin Tasks.
3. It is recommended that you use the Import control to import licenses from a file. Alternatively the license keys can
be cut and pasted into the Key field.
4. Click Apply.
5. Click on the save icon and save the updated configuration back to the IP Office system.
6. Use Manager to receive the configuration again and check that the status of the license. It should now be Valid.
234
54