Avaya IP Ofice 8.0, Быстрая установка

Страница: 164 / 256

IP Office Basic Edition - Quick Mode Installation Page 164
15-601042 Issue 24i (20 December 2011) IP Office 8.0
9.2.5 ETR6 Card
This card is used to add 6 ETR phone extension ports to an IP500 V2 control unit. This card is only supported by IP500 V2
systems running in IP Office Basic Edition - PARTNER® Mode or IP Office Basic Edition - Quick Mode (Mu-Law) modes.
It also includes 2 analog extension ports which are for emergency use only when the card is fitted with an analog trunk
daughter card. A further 4 RJ45 ports (9 to 12) are provided for trunk connections when an IP500 trunk daughter card is
fitted to this card.
·
Supports
ETR and analog phones. Each ETR phone can be used for an ETR or
analog phone. Support for ETR 34D phone is limited to a maximum of
2 per ETR6 card and 4 in total.
· IP500 Control Unit:
·
IP500 V2 Control Unit:
This card is only supported by IP500 V2 systems running in IP Office
Basic Edition - PARTNER® Mode or IP Office Basic Edition - Quick
Mode (Mu-Law) modes. The card is not supported in other systems or
if the system is changed to A-Law operation.
·
Maximum per Control Unit: 3.
·
IP500 Trunk Card Support: 1.
The IP500 BRI trunk daughter card is not supported.
Port Type Ports Features
ETR
Extensions 1 to 6
· REN 1.
· DTMF dialing only.
· Message waiting indication 51V stepped.
· ICLID mode Bellcore 202.
LEDs
·
No status LED are used for ETR ports.
·
LED1 is also used for base card status:
·
Red On = Error
·
Red Slow Flash = Initializing.
·
Red Flash every 5 seconds = Card okay.
·
Red Fast Flash = System shutdown.
EF 7 to 8
·
If fitted with an IP500 Trunk Daughter card, during power failure both these ports are
connected to analog trunk port 12.
·
Supports ICLID modes DTMFA, DTMFC, DTMFD, FSK and UK20.
·
REN 2 (1 for external bell device).
·
Off-Hook current: 25mA
·
Ring Voltage: 40V.
·
Intended for connection to two-wire analog phones, the ports do not include a ringing
capacitor. For connection to 4-wire analog phones, connection should be via a master socket
with ringing capacitors.
· No status LEDs are used for analog phone extensions.
Optional
Trunk Ports 9 to 12 Depends on the type of trunk daughter card fitted. The ETR6 can be fitted with either a Analog
Trunk card or PRI Trunk card.
LEDs
LED use depends daughter card type fitted.
·
LED 9 is also used for daughter card status.
·
Red On = Error
·
Red Slow Flash = Initializing.
·
Red Flash every 5 seconds = Card okay.
·
Red Fast Flash = System shutdown.
Analog
Card
· Green on = Card fitted.
· Green flashing = Trunk in use.
PRI Card
·
Off = No trunk present.
·
Green on = Trunk present.
·
Green flashing = Trunk in use.
·
Red/Green Fast Flash (port 9) or Green Fast Flash (port 10) = Alarm
indication signal (AIS) from the trunk remote end.
·
Red with Green Blink (port 9) or Green Blink (port 10) = Port in loopback
mode (set through IP Office System Monitor).
Name Description SAP Code
IPO IP500 V2 EXTN CARD ETR6 IPO IP500 V2 EXTN CARD ETR6 700476039
168 170