Avaya IP Ofice 8.0, Быстрая установка

Страница: 112 / 256

IP Office Basic Edition - Quick Mode Installation Page 112
15-601042 Issue 24i (20 December 2011) IP Office 8.0
7.4 Memory Card Removal
Card
Removal
Memory cards should always be shutdown before being removed when the system is running.
Though the card slot LEDs indicate when data is being written to an card, lack of flashing LED is not a
sufficient safeguard. Shutting down the card will disable Embedded Voicemail if being used. If the
System SD card is removed, features licensed by the card's Feature Key serial number will continue
operating for up to 2 hours.
Before a memory card is removed from an IP Office system that is running, the card must be shutdown. Removing a
memory card while the system is running may cause file corruption.
Card services can be restarted by either reinserting the card or using a Start Up command.
Card Shutdown Using IP Office Manager
1. Using IP Office Manager, select File | Advanced | Memory Card Commands | Shutdown.
2. Using the Select IP Office menu, select the IP Office system containing the memory card.
3. Click OK.
·
At the back of the control unit, confirm that the appropriate memory card LED is off.
·
The card can now be removed in order to perform the necessary maintenance actions.
Card Shutdown Using the System Status Application Application
1. Start System Status and access the IP Office's status output.
2. In the navigation panel select System.
3. Select Memory Cards.
4. Select either System Card or Optional Card.
5. At the bottom of the screen select Shutdown.
·
At the back of the control unit, confirm that the appropriate memory card LED is off.
·
The card can now be removed in order to perform the necessary maintenance actions.
150
55