Avaya IP Ofice 8.0, Быстрая установка

Страница: 87 / 256

IP Office Basic Edition - Quick Mode Installation Page 87
15-601042 Issue 24i (20 December 2011) IP Office 8.0
Initial Configuration Using IP Office Web Manager: Changing the Default Passwords
5.6 Setting the System Mode (PBX or Key)
The system can operate in either of two modes; PBX or Key. The selected mode affects the system's outgoing call routing
and incoming call routing settings.
Default Setting
The default setting for the system's Mode is determined by the type of SD card installed in the system.
·
IP Office U-Law SD Card
A system fitted with this type of card will default to U-Law telephony. For pre-IP Office Release 7.0 software,
the system will default to IP Office standard mode. For IP Office Release 7.0+, the system will default to IP
Office Basic Edition - Quick Mode Key System operation. Intended for North American locales.
·
IP Office A-Law SD Card
A system fitted with this type of card will default to A-Law telephony. For pre-IP Office Release 7.0 software,
the system will default to IP Office standard mode. For IP Office Release 7.0+, the system will default to IP
Office Basic Edition - Quick Mode PBX System operation. Intended for locales outside North America.
·
IP Office Partner Edition SD Card
A system fitted with this type of card will default to U-Law telephony and IP Office Basic Edition - PARTNER®
Mode Key System operation. Supported only in North American locales.
·
IP Office Norstar Edition SD Card
A system fitted with this type of card will default to A-Law telephony and IP Office Basic Edition - Norstar Mode
Key System operation. Supported only in Middle East and North African locales.
Changing the System Mode
·
!
WARNING
Changing this setting requires the system to be restarted for the change to take effect. This will end all
calls currently in progress.
·
In addition, any existing button programming is removed and all buttons are defaulted according to the
requirements of the selected mode.
1. Click on System in the menu bar and then click on Switch.
2. Change the currently selected Mode to the required setting; PBX or Key.
·
Key
The Number of Lines setting is used to automatically assign line appearance buttons on all extensions
with programmable buttons. To make external calls the user should select an available line appearance
button. Outbound call routing is determined by which line appearance button the user selects before
dialing or by the user's automatic line selection settings.
·
PBX
No line appearances are automatically assigned to programmable buttons. The Outside Line setting is
used to set the dialing prefix that indicates that the call is an external one for which an available line
should be seized. The Alternate Route Selection settings are used to determine which lines are used for
each outgoing call. Line appearance buttons can also still be configured for making and answering external
calls.
3. Click Save.