Avaya IP Ofice 8.0, Быстрая установка

Страница: 102 / 256

IP Office Basic Edition - Quick Mode Installation Page 102
15-601042 Issue 24i (20 December 2011) IP Office 8.0
6.4 Changing the IP Address Settings
When a new or defaulted IP Office is switched on, the control unit will make a DHCP requests for IP address settings on
each of its LAN interfaces (LAN1 and LAN2).
·
If the IP Office receives a response from a DHCP server, it will configure itself as a DHCP client using the address
details provided by the DHCP server.
·
If the IP Office does not receive a response from a DHCP server, it will configure itself as a DHCP server and use
the following default address details:
Network Settings LAN1 LAN2/WAN
IP address 192.168.42.1. 192.168.43.1
IP Mask 255.255.255.0 255.255.255.0
DHCP Mode Server Server
No of DHCP IP Addresses 200. 200.
If the IP address and DHCP mode settings are not suitable for the customers network they should changed. Note that
changing the IP Office's IP address settings requires it to restart.
·
!
WARNING
This process will require the IP Office system to reboot in order to complete the process. Any current calls and
services will be ended by the reboot.
Changing IP Address Settings
1. Start IP Office Manager and receive the configuration from the IP Office system.
2. On the Manager home page, select Change System Settings (or from the Admin Tasks list select System).
3. To use a fixed IP address, deselect Receive IP Address Via DHCP Server. Then in the IP Address (LAN1) and
Sub-Net Mask (LAN1) fields, enter the required IP address settings.
4. Click Apply.
5. Click on the save icon and save the updated configuration back to the IP Office system.
54