Avaya IP Ofice 8.0, Быстрая установка

Страница: 223 / 256

IP Office Basic Edition - Quick Mode Installation Page 223
15-601042 Issue 24i (20 December 2011) IP Office 8.0
System Components: Physical Ports
9.11.4 BRI Port (To)
These ports are BRI To interface ports for connection to external BRI trunk services. Note that BRI ports found on the
IP400 So8 module are BRI-S interface ports for connect to ISDN terminal devices, see BRI Port (So).
PRI/BRI Trunk Cable
This cable is used to connect from IP Office BRI/PRI trunk ports to the line providers network termination equipment. If
that equipment does not use RJ45 sockets, the cable may need to be stripped and rewired or an alternate cable used. The
appropriate signal pin-outs and wire colours are detailed below.
IP Office Wire Network
Termination
BRI RJ45 BRI PRI PIN RJ45
1 – Rx-A White/Orange 1
2 – Rx-B Orange/White 2
3 Tx-A – White/Green 3
4 Rx-A Tx-A Blue/White 4
5 Rx-B Tx-B White/Blue 5
6 Tx-B – Green/White 6
7 – – White/Brown 7
8 – – Brown/White 8
·
Supply: BRI/PRI trunks cards are not supplied with these cables.
·
Cable Color: Red.
· SAP Code: 700213440.
·
Standard Length: 3m/9'10".
·
Maximum Length: 5m/16'5''.
·
Though not used pins 7 and 8 are through connected for ease of construction.