Avaya IP Ofice 8.0, Быстрая установка

Страница: 242 / 256

IP Office Basic Edition - Quick Mode Installation Page 242
15-601042 Issue 24i (20 December 2011) IP Office 8.0
10.4 Further Information and Product Updates
Further information, including Product and Reference Manual updates, can be obtained from Avaya Dealers and
Distributors or from Avaya's web site:
http://www.avaya.com .
This guide is also available from the Avaya's support web site: http://support.avaya.com .
Support Telephone Numbers
For initial help and support, contact your distributor/supplier. The following contact points are for Avaya authorized
partners.
·
In the USA only
Avaya provides a toll-tree Customer Helpline 24 hours a day:
·
Name: Avaya Technical Support Organization (TSO)
·
Customer Helpline: 1 800 628-2888
· Address: 8744 Lucent Blvd., Highlands Ranch, Colorado, 80129 USA
·
URL: http://support.avaya.com
If you need assistance when installing, programming, or using your system, call the Helpline or your Avaya
representative. Consultation charges may apply.
·
Outside the USA
If you need assistance when installing, programming, or using your system, contact your Avaya representative.
·
URL: http://support.avaya.com
10.5 Port Safety Classification
The Avaya IP Office systems have the following ports which are classified as follows:
Port Name Port Description Port Classification
PRI port PRI ISDN connection (NET) TNV (Operating within the limits of SELV)
BRI ports BRI ISDN connection (NET) TNV (Operating within the limits of SELV)
Analog ports Two wire analog trunk TNV3
Power fail ports Two wire analog trunk TNV3
DTE port Async Data connection. SELV
Analog Telephone Ports Telephone Extension ports TNV2
Digital Telephone Ports Telephone Extension ports SELV
LAN ports 10/100 BaseT attachment to LAN. SELV
Expansion ports Expansion Module connector. SELV
Audio port Connector for Music on Hold. SELV
External Control port Connector for Controlling Ancillary
circuits. SELV
DC Input port Connector for DC input power. SELV
Interconnection circuits shall be selected to provide continued conformance with the requirements of EN 609050:1992/
A3:1995 clause 2.3 for SELV circuits and with the requirements of clause 6 for TNV circuits, after connections between
equipment.