Avaya IP Ofice 8.0, Быстрая установка

Страница: 90 / 256

IP Office Basic Edition - Quick Mode Installation Page 90
15-601042 Issue 24i (20 December 2011) IP Office 8.0
5.9 Setting the Number of Lines
For systems with their Mode set to Key, when the system's Number of Lines setting is changed, the following other
changes to the configuration occur:
·
The number of line appearance buttons set on all user extensions is reset to match the Number of Lines values. The
buttons are assigned from button 03 upwards and will overwrite any existing buttons that are set to become line
appearance buttons.
· The user's automatic line selection settings are reset to match the number of lines.
When a system is first installed, the Number of Lines setting is automatically set to match the number of analog trunks
present in the system. This means that all analog lines are automatically added as line appearances and added to the
automatic line selection settings of users. If no analog trunks are present when the system is installed, the setting defaults
to the first 5 lines.
Changing the Number of Lines Setting
·
!
Warning
If the Number of Lines value is changed, all existing line appearance buttons and automatic line selection
settings are overwritten. The existing functions on other programmable buttons are also overwritten if
they are in the range of buttons now specified for lines. Therefore it is recommended that this setting is
only changed when a system is first installed.
1. Click on System in the menu bar and then click on Switch.
2. In the System Parameters panel, change the Number of Lines setting to the required value.
3. Click Save.
87