Avaya 3050-VM Скачать руководство пользователя страница 91

Страница: 91 / 274

used for storing the private key. Otherwise, the private key and the public key in

the certificate will not match.

Type the

display

command and press

ENTER

. Choose to encrypt the private key,

and specify a password phrase. Make sure to remember the password phrase.

Copy the private key, including the

"-----BEGIN RSA PRIVATE KEY----- " and "-----END RSA PRIVATE KEY----- "

lines, and paste it into a text editor. Save the file with a .key extension. Preferably,

use the same file name that you defined for the .csr file, so the connection between

the two files becomes obvious. The name you define can indicate the server on

which the certificate and the corresponding private key is to be used.

Note:

When using an ASA 310-FIPS, the private key is protected by the HSM card and

cannot be exported.

After you have received the processed CSR from a CA, make sure to create a

backup copy of the certificate as well.

6. Open and copy the CSR.

Generating and Submitting a CSR Using the CLI

User Guide

April 2013 91

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 91 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: