Avaya 3050-VM Скачать руководство пользователя страница 70

Страница: 70 / 274

information, see the "DNS Servers Configuration " section under Configuration

Menu>System Configuration in the

Avaya Command Reference

• The name of the software upgrade package (upgrade packages are identified by the .pkg

file name extension).

It is important to realize that the set of installed VPN Gateways you are running in a cluster are

cooperating to give you a single system view. Thus, when performing a minor or a major

release upgrade, you only need to be connected to the Management IP address of the cluster.

The upgrade will automatically be executed on all the VPN Gateways in operation at the time

of the upgrade. All configuration data is retained. For a minor upgrade, normal operations are

usually unaffected, whereas a major upgrade may cause the VPN Gateway to reboot.

You need to perform a disk repartitioning on AVG 3050 and 3070 before upgrading from

Release 7.x to 9.0.0.0. You can use the following commands to repartition the hard disk:

•

/boot/repartition

to initiate repartitioning for the local host.

•

/cfg/sys/host<id>/repartition /cfg/sys/cluster/host <id>/
repartition

to initiate repartitioning for the given running host.

These commands are hidden and are not shown in the menu or considered for auto-completion

through <TAB>; they cannot be used in normal operation. Disk repartition takes approximately

5 to 7 minutes to complete the operation; it includes two automatic reboots, and makes the

host effectively out of service.

Access to the Management IP address can be accomplished through a Telnet connection or

SSH (Secure Shell) connection. Note however that Telnet and SSH connections to the VPN

Gateway are disabled by default, after the initial setup has been performed. For more

information about enabling Telnet and SSH connections, see

Connecting to the VPN

Gateway

on page 123. When you have gained access to the VPN Gateway, use the following

procedure.

1. To download the software upgrade package, enter the following command at the

Main menu prompt. Then select whether to download the software upgrade

package from a FTP/SCP/SFTP server.

>> Main#

boot/software/download

Select protocol (ftp/scp/sftp) [ftp]:

ftp

2. Enter the host name or IP address of the server.

Enter hostname or IP address of server:

<server host name or IP>

3. Enter the file name of the software upgrade package to download.

If needed, the file name can be prefixed with a search path to the directory on the

FTP/SCP/SFTP server.

If you are using anonymous mode when downloading the software package from

an FTP server, the following string is used as the password (for logging purposes):

admin@hostname/IP.isd

Upgrading the AVG Software

70 User Guide

April 2013

Comments? [email protected]

Содержание 3050-VM



















































































































































































































































































Результаты поиска

Содержание 3050-VM

Отзывы:

Avaya 3050-VM, Руководство пользователя, Страница: 70 / 274

Результаты поиска

Содержание 3050-VM

Отзывы: