Avaya 3050-VM, Руководство пользователя, Страница: 45 / 274

Specify the port you want to use for AVG management and other private traffic
between the VPN Gateway and the intranet. This port will be assigned to the private
interface (Interface 1).
3. Specify the host IP address for the current VPN Gateway.
Enter IP address for this machine (on management interface): <IP
address>
Specify a host IP address on the management (private) interface. This IP address
must be unique on the network and be within the same network address range as
the Management IP address (see
step 10 on page 46). The management interface
host IP address is assigned to Interface 1.
4. Enter network mask and VLAN tag ID.
Enter network mask [255.255.255.0]: <Press ENTER if correct>
Enter VLAN tag id (or zero for no VLAN) [0]: <VLAN tag id or ENTER>
Specify the desired network mask for the host IP address on the management
interface or accept the suggested value by pressing ENTER. If a connected router
or switch attaches VLAN tag IDs to incoming packets, specify the VLAN tag ID
used.
5. Enter
yes
and press
ENTER
to continue with creating a two-armed configuration.
Setup a two armed configuration (yes/no) [no]:
yes
6. Specify a new port number for the traffic interface.
Enter port number for the traffic interface [1-4]:
2
The traffic (public) interface port number will automatically be assigned to Interface
2.
7. Specify a host IP address on the traffic (public) interface.
Enter IP address for this machine (on traffic interface): <IP
address>
This IP address will be assigned to Interface 2 on the VPN Gateway, that is, the
public interface.
8. Enter network mask and VLAN tag ID.
Installing an AVG in a New Cluster
User Guide April 2013 45